Prepare Model for Display in the BIM Viewer (Demo)

Note: Before visualizing a model in the Archibus BIM Viewer or in any of the Technologies  / Innovative Solutions / Forge Integration example views, you must enable hardware acceleration for your web browser; this improves the speed at which models load. In some organizations, your IT department might mange this setting for you; if you cannot enable it yourself, please contact your IT department.

If you are doing demonstrations and using one of the Archibus servers, you can use the SmartClient Extension for Revit to publish a new model; the model will be published to our Autodesk account, and the model will be visible for all demonstration environments.

Procedure for Demonstration

Follow this process to try or demonstrate the BIM Viewer.

Step 1: Set up the demo server.

These demonstration servers automatically connect to the Archibus Forge account.

You have two choices:

Step 2: On board a new demo model (as needed)

This requires that you have Autodesk Revit V2022 (or later) and Archibus Smart Client Extension for Revit.

You will be able to see the model only on the Archibus demonstration server.

Choose from the following:

For information, see BIM Viewer: Onboarding (System Management Help).

Step 3: Work with the Model with the BIM Viewer

To use the BIM Viewer, you must have:


Run the BIM Viewer from one of these Navigator tasks:

See Also

BIM Viewer: Overview

BIM Viewer: Onboarding (System Management Help)