System / Add-In Manager / Reports Central
Foundations / Background Data & Reports / Reports Central

Add a Chart to the Report

If you have selected to include numeric fields in the report, you can optionally present your data with an analysis chart. For example, you could add a pie chart that visually shows the distribution of floor area among the various departments.

Adding a chart is an optional step, as you can produce a report that presents just the table data you specify with your selection of fields, restrictions, and calculations chart to a report

Examine the sample reports available in the Reports tab for examples of analysis charts.

This topic has the following sections:

Numeric Fields

In order to add a chart to a report, the report must include a numeric field. See the discussion of numeric fields in the Calculate Data topic.

Chart Types

You can choose to add the following chart types:

Chart Type Description
Pie

Presents data in a circular pie, with each wedge of the pie representing the percentage of the overall value (the field specified in Values)for the field on which you group the data (the field specified in Categories).

The pie chart displays the percentage represented by each wedge; hover over a pie wedge to determine the value that the wedge represents.
Bar

Presents data in a series of horizontal bars, with each bar proportionately representing the field on which you group the data.

The bar displays the value for each category.

The percentage of the overall value represented by the bar is not displayed.
Column

Presents data in a series of vertical columns, with each column proportionately representing the field on which you group the data.

The column displays the value for each category.

The percentage of the overall value represented by the column is not displayed.
Line Displays the calculation as a set of points connected by a single line. Line charts are handy for presenting information over a continuous period of time. For example, Total Lease Negotiable Area By Year can be presented in a line chart.

Define a Simple Chart

Without aggregating data, you can create useful charts that break down the values of a numeric field (the Values option) by a field you specify (the Categorizes option). For example, the below chart breaks down the Chargeable Area of the Rooms table by Division Code. The pie chart shows the percentage of overall chargeable area for each division. Hover over a pie wedge to see the value that the wedge represents.

The same settings for a column chart generates this chart.

Procedure

  1. Be sure that the fields you want to report on (such as Chargeable Area and Division Code in the below example) are active in the report. If not, return to the Select Fields tab to activate them.

  2. You might want to set a filter; for example, in the above image the view is restricted to floor HQ-17. To remind the user of this restriction, the user has specified the restriction in the Chart Title. Note that he chart does not consider further filters that you make in the grid with the grid's Smart Search console.

  3. From the Chart menu at the top of the vies, choose the type of chart: pie, bar, column, or line

  4. In the resulting form, complete the options as follows:

    Option Description
    Chart Title Although your report can have an overall title, you can explicitly describe what your chart reports on by completing the Chart Title option. Providing a clear description will help your users understand the chart.
    Categories Choose the field by which you want to break down the data.
    Aggregate As

    For a simple chart, such as the above example, leave this field blank.

    This option groups Values (such as Cost to Replace) by the Categories field (such as Building). Note that COUNT can be used with any field in the Values list, as it is a count of records.

    You can choose: SUM, COUNT, AVG, MIN, or MAX
    Values

    If you are not aggregating data or if you choose any aggregation option except Count, you can choose only from a list of numeric fields active in the view.

    If you chose Count for Aggregate As, you can choose any field in the view.

    Hide Zero Values Hides zero values from the chart. This is helpful to produce a cleaner chart in cases where there are categories without data. For example, this option hides all buildings where the SUM of the cost to replace is zero.
    Show Legend This option is not selected be default since the Show Axis Labels option displays the same information.
    Show Axis Labels Typically, you will want to display axis labels so that the user understands what the columns or bars represent. The above column chart and pie chart display the axis labels.
    Sort Ascending Sorts in ascending order the Categories axis by the Categories value. For example, alphabetically sort from A to Z all buildings by Building Code in ascending order.

  5. Click done on the Chart Options form. The chart displays at the top of the report, under the filters.

  1. If you want to further edit this chart, choose Chart Options from the Chart menu. You can edit any of the above options but you cannot change the type of chart.

Remove a Chart

Once you add a chart to a report and click the Done button on the Chart Options form, you might decide that it does not meet your needs and you want to start over. Once a chart exists in the report, the Chart menu offers a Remove Chart option. Select this to remove the chart.

You can also remove a chart from a saved report by using the Remove Chart option.

Define a Chart with Aggregated Data

You might want to group data into categories and specify the aggregation function for the values (count, sum, average, min or max), so that report consumers receive summarized information. With a chart showing aggregated data, the Chart can present the summary, while the grid presents the details of the contributing records.

In the Chart Options form, set the Aggregate As option to SUM, COUNT, AVG, MIN, or MAX

Examples of Aggregated Data

Define a column or bar chart summarizing the average cost to replace by equipment standard

Setting the report to these values produces the following chart. You can then review the grid records for the details of this summary information.

Option Value
Table Equipment (eq)
Fields eq_id, eq_std, cost_replace, bl_id
Filters Cost to Replace > 0
Building Code = HQ
Chart Type Column or Bar
Category Equipment Standard (eq.eq_std)
Aggregate As Average (AVG)
Value Cost to Replace

Define a pie chart counting the number of distinct rooms that are available and hotelable rooms by floor for building NC05

Setting the report to these values produces the following chart. You can then review the grid records for the details of the available rooms on floors 02, 03, and 05 in building NC05.

Option Value
Table Room (rm)
Fields Building Code, Floor Code, Room Code, Status, Hotelable?, Room Area
Filters Building Code = NC05
Hotelable? =Yes
Status=Available
Chart Type Pie chart
Category Floor Code
Aggregate As COUNT
Value Room Area

Define a line or column chart counting the work requests by date created for building HQ.

Option Value
Table Work Requests (wr or wrhwr)
Fields Work Request Code, Date Work Requested, Work Request Status, Building Code, Floor Code
Filters Building Code = HQ
Date Created: choose an interval
Chart Type Line or Column Chart
Category Date Work Requested
Aggregate As COUNT
Value Work Request Code

Define a line or column chart showing the count of employees by badge date entering building NC05

Note: Since COUNT supports only numerical columns, you must aggregate by Auto-numbered ID. If the data is duplicated, this method does not ensure that Archibus counts distinct employees. However, since Badge Data is a proof of concept we work under the assumption that the sample data has only one record per day, per employee and building.

Option Value
Table Daily Badge Swipes (bas_daily_badge_swipe)
Fields Date Accessed, Building Code, Employee Code
Filters Building Code = HQ; Date Created: choose an interval
Chart Type Line or Column Chart
Category Date Accessed
Aggregate As COUNT
Value Auto-Numbered ID

Notes

Note: If any of the Primary Key or Foreign Key fields is not available in the Categories drop-down but instead appear in the Select Values drop-down, it is likely that the Numeric Format property for this field has been set to Default instead of No Separator. Ask a System Administrator to correct the Numeric Format for this field.

Note: It is possible to include in your chart fields that do not make sense to report on. Archibus does not prevent you from adding any field to your chart, including fields that do not add value

Next

Save you Report and Add a Title

Export Grids and Charts

Back to

Reports Central Overview